POPC / POPCA
HOME > Rupture Disc > POPC / POPCA
Specification
STANDARDS
|
ASME CODE SEC. VIII, API RP520, KS B ISO 4126, KOSHA CODE
|
SIZE
|
1/2" ~ 48"
|
CONNECTION
|
JIS, ANSI, DIN, API, Ferrule & VCR Connection, etc
|
SETTING PRESS.
|
0.07 ~ 120bar
|
MAX. TEMP.
|
FEP PLASTIC SEAL 204℃(400℉), PFA PLASTIC SEAL 260℃(500℉), METAL SEAL 538℃(1000℉)
|
MATERIAL
|
304/316/316L SST, Nickel 200, Monel 400, Inconel 600, Hastelloy C276,Titanium, Tantalum, etc
|
OPERATING RATIO
|
80% of the tagged burst pressure
|
FLUID STATE
|
Gas/Vapor, Steam, Liquid
|
NON-FRAGMENTING
|
YES
|
VACUUM RESISTANT
|
Withstands full vacuum without the aid of vacuum suport
|
BURST TOLERANCE
|
Above 3bar ±5%, Below 3bar ±0.15bar(Adjustable at customer’s)
|
SEAT TYPE
|
30˚ Angular Seat Type / Flat Seat Type
|
Explanation
- The POPC (Dome Composite) rupture disc consists of the three confi gurations
of the pressure disc, the sealing sheet, and the vacuum disc.
- It is the type broken by the internal pressure of fl uid with the burst part
intentionally processed by the burst design value.
- It can be used widely in all areas such as gas, liquid, and steam.
- It should be mounted with the standard holder of our company for use.
Properties
- It is the type suitable to the application of low and middle pressure.
- The burst area and rated capacity are more excellent than any other model.
- The precision processing is possible to apply setting and bursting pressure.
The tolerance range is possible up to ±3%.
- Tefl on (PFA) is mainly used for the sealing sheet preventing liquid leakage.
- The material quality of the sealing sheet can be applied variously according to the
temperature and corrosiveness of fl uid. (PFA, PTFE, FEP, SUS316L, Nickel, Monel,
Inconel, etc.)
- It is the type resisting the full vacuum by applying the vacuum support if needed.
(Optional)
- It is the multi-layered structure type with the burst part processed by the
burst design.
- The disc rupture can be monitored in the control room by applying the alarm
sensor system. (Optional)