E-mail popdisc@popdisc.kr

POPF

HOME > Rupture Disc >POPF

Specification

STANDARDS

ASME CODE SEC. VIII, API RP520, KS B ISO 4126, KOSHA CODE

SIZE

1/2 " ~ 52"

CONNECTION

JIS, ANSI, DIN, API, Ferrule & VCR Connection, etc

SETTING PRESS.

0.014 ~ 30bar

MAX. TEMP.

FEP PLASTIC SEAL 204℃(400℉), PFA PLASTIC SEAL 260℃(500℉),
    METAL SEAL 538℃(1000℉)

MATERIAL

304/316/316L SST, Nickel 200, Monel 400, Inconel 600,
    Hastelloy C276,Titanium, Tantalum, etc

OPERATING RATIO

60% of the tagged burst pressure

FLUID STATE

Gas/ Vapor, Liquid, Steam

NON-FRAGMENTING

YES

VACUUM RESISTANT

Withstands full vacuum without the aid of vacuum suport

BURST TOLERANCE

Above 3bar ±5%, Below 3bar ±0.15bar(Adjustable at customer’s)

MFG. RANGE

0%

Explanation

  • The POPF (Flat Composite) rupture disc consists of the three confi gurations of the pressure disc, the sealing sheet, and the vacuum disc.

  • It is the type broken by the internal pressure of fl uid with the burst part intentionally processed by the burst design value.

  • It can be used widely in all areas such as gas, liquid, and steam.

  • The holder is not needed. It is installed between the standard or nonstandard companion fl anges. The compression non-asbestos or Tefl on gaskets are attached to both sides of the rupture disc.

Properties

  • It is the type suitable to the application of low and fi ne pressure.

  • The holder is not needed so that the price is the cheapest.

  • The burst area and rated capacity are more excellent than any other model.

  • The precision processing is possible to apply setting and bursting pressure. The tolerance range is possible up to ±3%.

  • Tefl on (PFA) is mainly used for the sealing sheet preventing liquid leakage.

  • The material quality of the sealing sheet can be applied variously according to the temperature and corrosiveness of fl uid.(PFA, PTFE, FEP, SUS316L, Nickel, Monel, Inconel, etc.)

  • Manufacturing is possible with the R.F or F.F type according to the fl ange specifi cation.

  • It is the type resisting the full vacuum by applying the vacuum support if needed.(Optional)

  • It is the multi-layered structure type with the burst part processed by the burst design.

  • The disc rupture can be monitored in the control room by applying the alarm sensor system. (Optional)

Top